Home Products Hydraulic Tools
Contact Us 
FranÁais web en EspaÒol

Hydraulic Tools

  • These tools, driven by an aerial device’s hydraulic system or any other hydraulic power source, feature the following advantages:
    • Safe power supply, totally insulated from ground potential.
    • No need to recharge batteries.


Impact Wrench and Drill
Impact Wrench and Drill

  • Twin-hammer impact mechanism provides high performance and reliability
  • Super SpoolTM allows quick switching between open-centre and closed-centre hydraulic systems
  • Quick-change chuck
  • Weight: 3.2 kg
  • Length/width/height: 208 x 107 x 269mm
  • Flow range: 15-45 lpm (optimum flow range: 19-30 lpm)
  • Operating pressure: 69-170 bar

 


Reversible Drill/Variable Speed Reversible Drill
Reversible Drill

  • Compact and lightweight
  • Super SpoolTM allows quick switching between open-centre and closed-centre hydraulic systems
  • Reversible
  • Drilling capacity: up to 13mm diameter in steel and up to 29mm diameter in wood
  • Key-type 13 mm chuck
  • Weight: 2.7 kg
  • Length/width/height: 190 x 76 x 229mm
  • Flow range: 15-30 lpm
  • RPM: 1.300 rpm a 23 lpm
  • Operating pressure: 69-170 bares



Long-Reach Chainsaws
Long-Reach Chainsaws

  • Cutting capacity: 330mm
  • Super SpoolTM for switching between open-centre and closed-centre hydraulic systems
  • Available in 2 lengths (1,588mm and 2,248mm)
  • Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269)
  • Safety features: two-step trigger, trigger guard and fully covered sprocket guard
  • Rugged high torque gear motor
  • Weight: 3.7 kg (1,588mm length) or 4.1 kg (2,248mm length)
  • Flow range : 19-30 lpm



Overhead Circular Saw
Overhead Circular Saw

  • Cutting capacity: 89mm
  • Overall length: 2,083mm
  • Super SpoolTM for switching between open-centre and closed-centre hydraulic systems
  • Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269)
  • Safety features: hand-stop collar, trigger guard, two-step trigger and branch stop
  • Rugged gear motor
  • Angular head design makes flush cuts easier and directs chips away from operator
  • Weight: 4.1 kg
  • Flow Range : 15-23 lpm



Utility Pruner
Utility Pruner

  • Super Sleeve TM for open-centre or closed-centre hydraulic systems.
  • Cutting diameter: 50mm
  • Overall length: 2.159 mm
  • Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269)
  • Heat barrier grip and full trigger guard
  • Flow Range : 15-23 lpm



Dieless Crimping Tool
Dieless Crimping Tool

  • No high pressure intensifier required.
  • Uses 4 indentors to make crimp in a few seconds
  • Operates on both open-centre and closed-centre hydraulic systems
  • Head rotates for easy positioning and coupling to hydraulic circuit
  • Powered in both the advance and retract directions to prevent hang-ups
  • Weight: 5.8 kg
  • Operating pressure: 95-170 bar
  • Crimping force at 95 bar: 55 kN
  • Flow Range : 11-34 lpm



High-pressure Hydraulic Control Valves for Cutters and Crimping Tools High-pressure Hydraulic Control Valves

  • May be directly connected to the tool or used remotely with hoses.
  • Compact
  • 4-way, 3-position valve
  • 207-275bar return line ground dump safety valve
  • Weight: 1.4 kg
  • High pressure quick disconnects included (700 bar)
  • Return pressure: 350 bar
  • Input Flow Range: 12-30 lpm


Follow us