Various Terex Insulated Aerial Device
Home ApplicationsInsulated Aerial Devices Telescopic Units
Contact Us 
FranÁais web en EspaÒol

TEREX® T292 Telescopic Aerial Device
Products with marking
On all TEREX TELELECT TC units available in Europe, both the elevating platform itself and its mounting on all the major chassis brands are CE marked, thereby ensuring full compliance with current legal and regulatory requirements in any EU country
Terex T292 Telescopic Aerial Device drawing




Standard Equipment
  • Open-Center Hydraulic System.
  • Safety Harness With Attached Lanyard.
  • Stop/Start At Upper Controls.
  • 370°Non-continuous Rotation.
  • Padded Boom Rest.
  • 7 Gallon Hydraulic Oil Reservoir Inside Pedestal.
  • Lower Controls Override Upper Controls.

    INSULATED, SIDE MOUNT
  • 24” x 24” x 42” One-Person Side Mount Platform 300 lb. Capacity - Gravity Leveled.
  • Turntable Mounted Lower Controls.
  • Boom Mount Individual Lever Hydraulic Upper Controls.
  • Category “C” Rating Per ANSI A92.2.
  • Steel Main And Fiberglass Second Section Boom.

    INSULATED, END MOUNT
  • 24” x 24” x 42” One-Person End Mount Platform 300 lb. Capacity - Hydraulically Leveled.
  • Turntable Mounted Lower Controls.
  • Platform Mount Individual Lever Hydraulic Upper Controls.
  • Category “C” Rating Per ANSI A92.2.
  • Steel Main And Fiberglass Second Section Boom.

    NON-INSULATED, SIDE MOUNT
  • 24” x 24” x 42” One-Person Side Mount Platform 300 lb. Capacity - Gravity Leveled.
  • Boom Mount Electric Toggle Upper Controls.
  • Pedestal Mounted Electric Toggle Lower Controls.
  • Steel Main And Aluminum Second Section Boom.

    NON-INSULATED, END MOUNT
  • 24” x 24” x 42” One-Person End Mount Platform 300 lb. Capacity - Hydraulically Leveled.
  • Platform Mount Electric Toggle Upper Controls.
  • Pedestal Mount Electric Toggle Lower Controls.
  • Steel Main And Aluminum Second Section Boom.

Capacities and Dimensional Data Terex T292

 

Optional Equipment

  • Van Mount Configuration
  • Terex T292 Telescopic Aerial Device
  • 24” x 30” x 42” Side Mount Platform (Insulated).
  • 24” x 24” x 42” Curbside Cutout Platform (Non-Insulated).
  • 24” x 24” x 42” Square Splicer Platform (Non-Insulated).
  • 350 lb. Platform Capacity
  • Platform Liner (Insulated).
  • Vinyl Platform Covers
  • Continuous Unrestricted Rotation.
  • Two Speed Throttle Control.
  • Hydraulic Tool Outlets Above And/Or Below Rotation.
  • Moving Outrigger Alarm.
  • 12 Volt Auxiliary Let Down.
  • Stop/Start At Lower Controls.
  • A-Frame Outriggers With Boom Interlock.
  • 20 Gallon Remote Oil Reservoir.
  • Manual Hi/Low Speed.
  • Boom Overstow Protection.
  • Boom/Boom Stow Interlock.



Group's laboratory

Follow us